Login Router US Robotics

The US Robotics Router Control Page offers the ability to configure a firewall, create guest networks, modify Wi-Fi password and perform a variety of options.

Important: Before trying to access, make sure the PC is connected to the router; This can be achieved with an Ethernet cable or by connecting to the Wi-Fi network.

How to log in to the US Robotics router?

The following steps will take you to the router's administration panel:

  1. Access the router's administration panel by typing http://192.168.0.1 in the address bar of your browser.
  2. Sign in with the credentials provided on the router label or in the user manual.
  3. Within the panel, you can access advanced settings and customize them according to your needs.

Change the SSID of the Wi-Fi network on the US Robotics router

If you prefer to change the SSID of the WiFi network, you can do so in the administration panel. Follow the above mentioned method to access the panel and then proceed with editing the SSID.

  1. To get started, access your router's Control Panel. This process is mentioned above and makes it easy to log in.
  2. Once inside, scroll to the home page and select the Wireless option located in the left column.
  3. On the next page, look for the Network Name (SSID) section, where you will find your current SSID.
  4. Enter the desired new SSID in the appropriate field.
  5. Finish by clicking Apply to save the settings. After clicking Apply, the router will reboot automatically and the SSID will be updated upon reboot.

Change Wi-Fi password on the US Robotics router

Modifying the router password is a possibility through the control panel. Follow the following steps to carry out the modification:

  1. Log in to the Router Control Panel using the above-mentioned method to log in.
  2. Once inside, navigate to the home page and click on the Wireless option found in the left column.
  3. Make sure encryption is set to WPA2-PSK.
  4. Now look for the WPA Pre-Shared Key field. Enter your new WiFi password here, which must be between 8 and 63 characters, including letters, numbers and special symbols.
  5. After entering the new WiFi password, click Apply to save the changes.
  6. The router will reboot automatically. After the reset, connect your devices to the WiFi network using the new password.

IP addresses used by US Robotics