Sign in Siemens Router

The Siemens router control page offers the ability to configure a firewall, create guest networks, modify Wi-Fi password and perform a variety of options.

Remember: Before trying to access, verify that the PC is connected to the router; This can be done with an Ethernet cable or by connecting to the Wi-Fi network.

How to log in to the Siemens router?

To access the router's administration panel, follow these steps:

  1. Accessing router settings is easy: simply type http://192.168.0.1 in the address bar of your browser.
  2. Use the login credentials found on the router label or in the user manual to log in.
  3. Within the administration interface, you will be able to access advanced settings and customize them according to your needs.

Change the SSID of the Wi-Fi network on the Siemens router

To edit the SSID of the WiFi network, access the administration panel. Follow the steps explained above to access the panel and then make the necessary modifications.

  1. To start, Access your router's Control Panel. This process is mentioned above and makes it easy to log in.
  2. Once inside, scroll to the home page and select the Wireless option located in the left column.
  3. On the next page, look for the Network Name (SSID) section, where you will find your current SSID.
  4. Enter the desired new SSID in the appropriate field.
  5. Finally, click Apply to save the settings. After clicking Apply, the router will reboot automatically and the SSID will be updated upon reboot.

Change Wi-Fi network password on the Siemens router

Modifying the router password can be done through the control panel. Follow the steps below to make the necessary settings:

  1. Access the Router Control Panel using the above-mentioned method to log in.
  2. Once inside, go to the home page and select the 'Wireless' option located in the left column.
  3. Verify that encryption is set to WPA2-PSK.
  4. Look for the 'WPA Pre-Shared Key' field. Enter your new WiFi password here, which must be between 8 and 63 characters, including letters, numbers, and special symbols.
  5. After entering the new password, click 'Apply' to save the changes.

The router will reboot automatically. After the reset, connect your devices to the WiFi network using the new password.

IP addresses used by Siemens