Login Repotec Router

The control interface of the Repotec router Allows you to configure a firewall, create guest networks, modify the Wi-Fi password and perform various operations.

Attention: Before trying to access, make sure the PC is connected to the router; You can do this using an Ethernet cable or by connecting to the Wi-Fi network.

How to log in to the Repotec router?

Consult the following steps to enter the router administration panel:

  1. To access the router settings, open your browser and type http://192.168.0.1 in the address bar.
  2. Use the login credentials found on the router label or in the user manual.
  3. Explore the administration interface to access advanced settings and customize them to your needs.

Change the SSID of the Wi-Fi network on the Repotec router

If you need to modify the SSID of your WiFi network, you can do so through the administration panel. Follow the method mentioned above to access the dashboard and then make the appropriate changes.

  1. Log in to your router's Control Panel as a first step. This method has already been mentioned and makes the login process easier.
  2. Once inside, navigate to the home page and select the Wireless option found in the left column.
  3. On the next page, look for the Network Name (SSID) section, where you will find your current SSID.
  4. Enter the desired new SSID in the appropriate field.
  5. Then click Apply to save the settings. After clicking Apply, the router will reboot automatically and the SSID will be updated after the reboot.

Change Wi-Fi network password on the Repotec router

Changing the router password can be done through the control panel. Follow the following steps to carry out the modification:

  1. Access the Router Control Panel using the method mentioned above to log in.
  2. Once inside, go to the home page and select the 'Wireless' option located in the left column.
  3. Verify that encryption is set to WPA2-PSK.
  4. Look for the 'WPA Pre-Shared Key' field. Enter your new WiFi password here, which must be between 8 and 63 characters, including letters, numbers, and special symbols.
  5. After entering the new password, click 'Apply' to save the changes.
  6. The router will reboot automatically. After the reset, connect your devices to the WiFi network using the new password.

IP addresses used by Repotec