Login Aztech Router

The Aztech router has a configuration section where there are functionalities that allow the configuration of a firewall, the creation of guest networks, the modification of the Wi-Fi password and the execution of several different options.

Details: Make sure you connect the PC to the router before logging in, either through an Ethernet cable or through the Wi-Fi network.

How to log in to Aztech router?

Follow the steps below to enter the dashboard. router administration:

  1. Enter the router login page by opening your browser and typing “http://192.168.0.1".
  2. Use the login credentials found on the router label or in the user manual.
  3. Explore the management interface to access advanced settings and customize your router.

How to change the SSID of the Wi-Fi network on the Aztech router?

To change the SSID of the Wi-Fi network, access the management panel using the method mentioned above. From this platform, you can carry out the modification following the detailed steps.

  1. Access the Control Panel of your router, following the previously mentioned method.
  2. Once inside, go to the home page and select “Wireless” in the left column.
  3. On the next page, locate the “Network Name (SSID)” section to find your current SSID.
  4. Enter the new SSID in the “Network Name (SSID)” field.
  5. Save the settings by clicking “Apply”. After this step, the router will reboot, changing the SSID after the reboot.

Change Aztech WiFi network password

It is possible to make changes to the router password through the control panel. For that, you must rely on the following steps:

  1. Log in to the Router Control Panel using the previously mentioned method.
  2. Once inside, go to the home page and select “Wireless” in the left column.
  3. Verify that encryption is set to WPA2-PSK.
  4. Find the “WPA Pre-Shared Key” field. Enter your new WiFi password, 8 to 63 characters, with a combination of letters, numbers and symbols.
  5. After entering the new password, click “Apply” to save the changes.
  6. The router will reboot. After the reset, connect your devices to the WiFi network using the new password.

IP addresses used by Aztech