Login SpeedToch Router

The SpeedTouch Router Administration Panel provides options to configure a firewall, create guest networks, modify Wi-Fi password, and perform various operations.

Notice: Before trying to access, the PC needs to be connected to the router; This can be done using an Ethernet cable or by connecting to the Wi-Fi network.

How to log in to SpeedTouch router?

Next, I show you how to access the router's administration panel:

  1. To access the router settings, open your browser and type http://192.168.0.1 in the address bar.
  2. Use the login credentials provided on the router label or in the user manual.
  3. Explore the administration interface to access advanced settings and customize them to your needs.

Change the SSID of the Wi-Fi network on the SpeedTouch router

In case you want to change the SSID of your WiFi network, you can do it in the administration panel. Use the previous instructions to access the panel and then modify the SSID as necessary.

  1. Log in to your router's Control Panel as a first step. The method has already been mentioned and makes it easy to log in.
  2. Once inside, navigate to the home page and select the Wireless option located in the left column.
  3. On the next page, look for the Network Name (SSID) section, where you will find your current SSID.
  4. Enter the desired new SSID in the appropriate field.
  5. Finally, click Apply to save the settings. After clicking Apply, the router will reboot automatically and the SSID will be updated upon reboot.

Change Wi-Fi network password on the SpeedTouch router

It is possible to modify the router password through the control panel. Follow the following steps to make the modification:

  1. Access the Router Control Panel using the method mentioned above to log in
  2. Once inside, go to the home page and select the 'Wireless' option located in the left column.
  3. Verify that encryption is set to WPA2-PSK.
  4. Look for the 'WPA Pre-Shared Key' field. Enter your new WiFi password here, which must be between 8 and 63 characters, including letters, numbers, and special symbols.
  5. After entering the new password, click 'Apply' to save the changes.
  6. The router will reboot automatically. After the reset, connect your devices to the WiFi network using the new password.

IP addresses used by SpeedTouch