On the Senao router administration page, we find options to configure a firewall, establish guest networks, change the Wi-Fi password and perform various actions.
Warning: It is crucial that the PC is connected to the router before attempting to access it; This can be achieved by using an Ethernet cable or by connecting to the Wi-Fi network.
How to log in to the Senao router?
Follow the following instructions to access the router administration panel:
- To access the router settings, type http://192.168.0.1 in the address bar of your browser.
- Use the login credentials provided on the router label or in the user manual to log in.
- Once inside, explore the administration interface to access advanced settings and customize them to your needs.
Change the SSID of the Wi-Fi network on the Senao router
If you want to set the SSID of the wireless network, you can do it in the administration panel. Use the previous instructions to access the panel and then proceed with modifying the SSID.
- Enter your router’s Control Panel using the method mentioned above.
- Once inside, go to the home page and choose the “Wireless” option located in the left column.
- On the next page, locate the “Network Name (SSID)” section to find your current SSID.
- Enter the new SSID in the field designated for “Network Name (SSID).”
- Save the settings by clicking “Apply”. After this step, the router will reboot, updating the SSID after the reboot.
Change Wi-Fi network password on the Senao router
You can make settings to the router password using the control panel. Follow the following steps to make the modification:
- To get started, log in to the Router Control Panel using the method mentioned above.
- Once inside, head to the home page and select the ‘Wireless’ option in the left column.
- Make sure encryption is set to WPA2-PSK.
- Locate the ‘WPA Pre-Shared Key’ field. Here, enter your new WiFi password, which must be between 8 and 63 characters, including letters, numbers, and special symbols.
- After entering the new password, click ‘Apply’ to save the changes.
- The router will reboot automatically. After the reset, connect your devices to the WiFi network using the new password.