Inside the Motorola router, we find an administration page that allows you to configure a firewall, establish guest networks, modify the Wi-Fi password and perform other tasks.
Note: Before trying to access, check that your PC is connected to the router; You can do this using an Ethernet cable or by connecting to the Wi-Fi network.
How to log in to Motorola router?
Follow the steps below to enter the router management panel:
- Accessing the router settings is simple: open your browser and type http://192.168.0.1 in the address bar.
- Use the login credentials provided on the router label or in the user manual to log in.”
- Once logged in, explore the administration interface to access advanced settings and customize them to your needs.
Change the SSID of the Wi-Fi network on the Motorola router
To modify the SSID of your WiFi network, access the administration panel. Follow the previous instructions to access the panel and then make the necessary settings.
- First access your router’s Control Panel to log in. The method has already been mentioned above and it will make the login process easier for you.
- Once inside, navigate to the home page and click on the Wireless option located in the left column.
- On the next page, look for the Network Name (SSID) section, where you will find your current SSID.
- Enter the desired new SSID in the appropriate field.
- Finally, save the changes by clicking Apply. After clicking Apply, the router will reboot automatically and the SSID will be updated upon reboot.
Change Wi-Fi password on the Motorola router
Modifying the router password is possible through the control panel. Follow the steps below to make the necessary settings:
- Log in to the Router Control Panel using the method mentioned above to log in.
- Once inside, go to the home page and select the ‘Wireless’ option located in the left column.
- Verify that encryption is set to WPA2-PSK.
- Look for the ‘WPA Pre-Shared Key’ field. Enter your new WiFi password here, which must be between 8 and 63 characters, including letters, numbers, and special symbols.
- After entering the new password, click ‘Apply’ to save the changes.
- The router will reboot automatically. After the reset, connect your devices to the WiFi network using the new password.